A truly economic noise and vibration analyzer, dual-channel ICP® (IEPE) digital signal conditioner, T-DAQ IEPE offer standard plug & play USB class one audio digital output. Hassle-free setup and intuitive functionality by just plugging the unit into a USB port and viewing signals from accelerometers, microphones, hammers, or any other IEPE/ICP-type sensor using the powerful and intuitive TViB™ software. Existing third-party Windows® or Linux® software can be used to acquire time waveforms, frequency spectra, overall vibration levels, FRF’s and octave measurements or simply record data for further analysis. Compact form factor, versatility, and powerful software options make this the perfect DAQ for taking in-situ measurements. Whether you’re a novice or an expert in test and measurement systems; or simply want to add digital, portable functionality to your existing sensors in lab or industry; the T-DAQ IEPE is a practical and affordable addition to your toolset.
OVERVIEW
Swiftly hear, acquire, save & post-process on-the-go
Powerful T-ViB™ modular software for sound and vibration analysis
High-quality, 24-bit, broad-frequency measurements
2-channel ICP (IEPE) sensor inputs
Stethoscope mode for monitoring real-time vibration signal.
100% Plug & play
Compact form-factor
Most economical solution for industry and academia.
Compatible with MATLAB®, LabVIEW™, and a variety of time and frequency signal analysis programs
HARDWARE SPECIFICATION
Number of Input Channels 2
Sampling Frequency 48 kHz
ADC Bit Resolution 24 Bits
Input Voltage Range ± 10 V
Input Connectors & Interface BNC, Single Ended, IEPE, 24V 4mA
Input Coupling Type AC (High pass filtered at 0.03Hz)
Input Impedance 510 k Ω
Frequency Response 0.03 Hz – 22.8 kHz
Frequency Accuracy 50 PPM
Anti-aliasing Filter 22.8 kHz at Sampling Rate 48 kHz Voltage
Accuracy ±0.5% at 1 kHz
Output Connector & Interface ϕ3.5 mm Stereo Audio Jack
PC Interface USB 2.0 Full Speed / USB 1.1
Power Consumption Max. 0.5W
TYPICAL APPLICATIONS
General conditioning monitoring of pumps, motors, compressors, fans, gearboxes, bearing etc. based on the ISO 10816 standard
Vibration meter: Running RMS, Peak, Skewness, Kurtosis, Crest factor etc.
Sound level meter: SPL, Octave, Leq, Lpk, L10, L50, L95, A/B/C/fast/slow filters etc.
Sound & vibration measurements: FRF, isolation, transmissibility, Impact testing, shaker testing and correlation studies
Human Vibration Analysis based on ISO 8041-1:2017 standard
Bump testing, order analysis, balancing and run-up/run-down testing.
Educational laboratory experiments
